Water Damage on iPad Screens

iPads and other electronic gadgets can be severely damaged by water. Liquid intrusion into your device can result in corrosion, short circuits, and irreversible internal component damage. Because moisture can get trapped between the layers, the screen is especially susceptible to discoloration, unresponsive touch controls, and other long-term failures.

7 Tips To Get Water Out Of iPad Screen

1. Turn It Off Immediately

When you find that water got into your iPad, turn it off completely. Don't test it to see if it works; doing so could damage the electricity even more. Hold down the power button and then slide it to turn it off. This important first step stops a possible short circuit and gives you the best chance of saving the gadget.

2. Remove External Accessories

Disconnect all external accessories immediately. Remove:

• Protective cases

• Keyboard covers

• Screen protectors

• Charging cables

These things can hold water against the iPad's surface, which could make the damage worse. By removing them quickly, you let air flow and begin drying.

3. Dry the Exterior Gently

Wipe the outside of your iPad down carefully with a soft, lint-free cloth. Do not use rough things like paper towels that could scratch the screen. Do not rub; gently dab to remove the water drops you can see. Extra care should be taken with ports, buttons, and areas where water likes to gather.

4. Eject Water from Ports

The Lightning port and speaker grills on your iPad can get wet. A water-ejection feature is built into most new iPads. If not, hold the compressed air straight up and keep a safe distance to blow out any stuck moisture. Do not use a hair dryer or any other heat source, as this can hurt the inside even more. 

5. Leave It in a Dry Place

Pick a place with good airflow and low humidity. Stay away from direct sunlight and heat sources. It's best to lay your iPad flat or slightly tilted so that gravity can help drain any extra water. The drying process works best when there is a lot of airflow.

6. Use Silica Gel for Enhanced Drying

Put silica gel packets around your iPad if you have them. These little packets that soak moisture can help pull out wetness better than air alone. Put several silica gel packets around the device to make a small, enclosed room, but don't put them directly on the iPad.

7. Wait Patiently

You shouldn't turn on your iPad right away. Being patient is very important during the water damage repair process. Let the device dry for at least 24 to 36 hours before you try to turn it on. 

4 Steps to Avoid After Water Exposure

1. Avoid Powering or Charging

You should never try to charge or connect a wet iPad. Electricity and water don't go well together; this can lead to:

• Electrical circuit damage that can't be fixed.

• Possible short-circuiting.

• The a chance that an internal part will break.

• In the worst situations, possible dangers to safety.

2. Keep Your Hands Off

You shouldn't use your iPad while it's still wet. If you turn on or use a wet device, you greatly raise the risk of:

• Water damage that happens faster.

• Internal component damage that can't be fixed.

• Not taking advantage of possible guarantees or insurance coverage.

3. Don't Play Device Detective

Although opening up your iPad and inspecting the damage might seem logical, this is a major mistake. DIY disassembly can:

• Void the guarantee on your device.

• Bring more rain to the area.

• Risk more damage to the inside.

• It could damage sensitive electronic links.

4. Steer Clear of Factory Resets

A factory restart may sound like a quick fix, but it can be very bad for a device that has been damaged by water. When you try to return to the original settings, it can:

• Set off hardware problems that are hidden.

• Cover up the water damage.

• It could damage your device's operating system.

• Cause the whole device to fail.

How Long Does It Take For Water To Evaporate From iPad?

It usually takes 24 to 36 hours for all the water to drain from an iPad. Hold your device straight up or stand it up during this time. After the first 24 hours, carefully flip the iPad to ensure all the water can drain from different sides. The drying time varies depending on several factors, such as the humidity level, the amount of water exposure, the water resistance of your iPad model, and the airflow in the drying area.

Set up the best conditions for removing moisture during the critical drying time. Pick a place with a steady room temperature between 68°F and 72°F, low humidity, and good airflow. Stay out of direct sunlight or heat sources that could hurt the inside parts. 

What Does Water Damage Look Like On iPad?

Water damage can manifest in several ways:

• Discolored or blurry screen

• Unresponsive touch controls

• Strange lines or patterns on the display

• Distorted sound from speakers

• Difficulty charging or connecting accessories

Conclusion

If you act quickly and carefully, you can prevent your iPad from getting water damage. Remember the most important steps: turn it off immediately, remove any accessories, dry it gently, and wait. This can help, but the best thing to do is always to avoid problems in the first place. For professional assistance, Your Phone Guy offers expert repair services to help restore your device.